• If you power cycle the machine because of weird errors, you must leave the machine turned off for a minimum of 10 minutes
  • AG stacker table extension will not retract/retracts very slowly
    • depth can't be greater than 19
  • Secondary lift table will not lift up and down
    • BCS Auto Position needs to be turned on so both tables will raise for bundle breaker
  • door limit won't light up
  • compression section
  • Feeder vacuum fan VFD troubleshooting
  • Production hit e-stop and now machine won't run
  • Machine breaker turns off not due to high current
  • Bundle breaker faults with break fault
    • If the bundle is an irregular shape, when it breaks, it may not be clearing the photo eye in time. You can lower the across measurement in the setup and it will fix this.